Direct hydraulic brakes

COREMO oil-applied direct hydraulic brakes provide a clamping force proportional to the pressure of the oil acting within the chamber in the brake body. Brake bodies - in cast iron or steel - are designed to withstand high pressures and prevent oil leaks. The brake operating temperature varies from -40 [°C] to +200 [°C]. ID direct hydraulic brakes are complete with wear indicator and inductive ON/OFF positioning sensor.Spring-applied direct hydraulic brakes generate a force produced by the action of the cup springs inside the thruster body. The steel and SG iron bodies are certified, tested and inspected. ID brakes are designed to withstand the stresses generated during dynamic braking, while the steel bodies are calculated to support pressures of over 100 [bar]. The lining pads are produced in full compliance with the relevant European standards on safety and toxic substances. ID spring-applied direct hydraulic brakes are complete with wear indicator and inductive ON/OFF positioning sensor to indicate opening and closure. Operating temperatures vary from -20 [°C] to +200 [°C] and must be assessed in relation to the type of application. These brakes are suitable for emergency or holding and parking braking.