Coremo / Brakes and clutches

brakes & clutches

Coremo Hydraulic Brakes are designed to provide a simple and fast solution to the safety requirements of a wide range of industrial applications. Available with levered or direct thruster, either oil or spring applied, these brakes are designed to allow multiple configurations and maximum customization.

All brakes are equipped with regulating systems which optimize performances and guarantee the highest level of efficiency and safety, with the minimum wear rate. Mechanical or inductive ON/OFF sensors and pad wear indicators grant a costant check of the brake, reducing maintanance times and costs and ensuring the maximum safety.
Hydraulic brakes are fitted with pad tested both statically and dinamically. The friction material is chosen during brake selection to guarantee the best braking, considering the application, the enviromental conditions, the disc material and applicable regulations.

Standard hydraulic brakes are designed to operate indoors at a working temperature between -10°C and +100°C. For outdoors or extreme applications (low temperature, Off-shore corrosive enviroments) ad hoc solutions can be proposed.
Caliper Hydraulic Brakes
Oil Applied
Spring Applied
A serie
A serie
Braking Force
from 7,2 [kN] to 16 [kN]
Oil Applied
Spring Applied
D serie
D serie
Braking Force
from 6,8 [kN] to 16,9 [kN]
Oil Applied
Spring Applied
E Serie
E Serie
Braking Force
40 [kN]
Oil Applied
Spring Applied
EL Serie
EL Serie
Braking Force
40 [kN]
Oil Applied
Spring Applied
F Serie
F Serie
Braking Force
from 6,8 [kN] to 16,9 [kN]
Oil Applied
Spring Applied
G Serie
G Serie
Braking Force
from 6,7 [kN] to 16,8 [kN]
Oil Applied
Spring Applied
Direct Hydraulic Brakes
Oil Applied
Spring Applied
Extreme
ID Serie
ID Serie
Braking Force
from 8,4 [kN] to 19,7 [kN]
Oil Applied
Spring Applied
Extreme
ID 900 Serie
ID 900 Serie
Braking Force
from 16,8 [kN] to 50 [kN]
Oil Applied
Spring Applied
Extreme
ID 1500 Serie
ID 1500 Serie
Braking Force
from 49,3 [kN] to 69 [kN]
ID 2000 Serie
ID 2000 Serie
Braking Force
from 47 [kN] to 210 [kN]
ID 3000 Serie
ID 3000 Serie
Braking Force
from 200 [kN] to 270 [kN]
IS MS 1000 Serie
IS MS 1000 Serie
Braking Force
from 8 [kN] to 48 [kN]
Oil Applied
Spring Applied
Extreme

Media and Download

Technical Catalog

Tec. Cat. Hydraulic Brakes

PDF

Brochure

Hydraulic Brakes

PDF