ID 2500 N

ID 2500 N

Braking force F :
150000 N
Adjust according to ensure the correct torque value is achieved
Dynamic torque :
= F • (disc radius m - 0.101) = Nm
Minimum release pressure :
180 bar
Max pressure :
220 bar
Max total wear :
18 mm
Thickness of new lining :
14 mm
Hydraulic fluid :
Mineral oil based SAE/ISO 46
Total oil displacement for 2 mm movement of each pad :
0.3 dm3
The diagram shows the torque variation for each millimeter of linings wear

The COREMO ID 2500N hydraulic brake is operated by cup springs which generate a constant clamping force. The hydraulic operating system releases the brake by compressing the springs inside the thruster. The brake may be used as a safety brake or for parking and holding. It also has an ON/OFF inductive sensor indicating opening and closure. A wear indicator warns of the maximum lining pad wear level.
The brake operating temperature is -40 [°C] to + 200 [°C].

The Coremo Ocmea service is completed by reporting which includes calculations, FEM analyses and technical reports (all in English) supplied to the customer to complete the technical documentation of the machine on which the brakes are to be installed. This enables customers to make comments on the design variables and allows the Technical Department to adjust the design to provide the most suitable solution.